The water temperature gauge only works when it feels like it. When it does work, the check engine light illuminates. When I check the fault codes, only number 12 comes up - which is normal operation. There is no apparent fault with the engine when this happens.
Engine has oil leaks from the rocker covers, and somewhere down the back of the engine. But it is a high mileage engine, so these are to be expected from now on.
Windscreen wiper fell off - only required the nut to be done up again.
Water is somehow getting into the boot and soaking the carpet every time it rains.
Headlights didn't work on low beam. But cleaning the connectors with sand paper fixed this.
The back seat has a spring sticking up under the fabric.
Door locks are stiff to operate.
Despite all the niggly bits, I love the car. It can really hammer along if you feed it. The VN only weighs 1335kg, so the modest 125kw powerplant is really responsive.
It takes a bit to get used to the handling (mine has FE2 suspension and I think the springs have been cut as well). It hangs on really well, but when it goes, you've pushed it too far and the back just goes where it wants. Most times this results in mounting a kerb. Doesn't matter which one, they're all good!!
Has better fuel economy than my friend's 1994 3.0 V6 Magna (10 L/100km for the Commodore - 13 l/100km Magna).
Trying to change the standard radio to a brand new CD head unit was a major drama - i.e. actually managing to pull the standard one out. Ended up having to break the lugs and a pop rivet.
I had troublesome water leakage into my boot too. Took it to two Holden dealerships before it was cured. The second dealership discovered both rear light clusters had holes/gaps inside them. They sealed them up with silicon sealant and the water leakage went away.
I have a 1980 5L VC Commodore and I found that the leaky boot was caused by extensive rust under the rubber seals around the lip of the boot. It was cheap to fix, but did involve grinding and welding so if you are looking for a quick fix just silicone it or something.
I also have a leaking boot lid on my 2002 Commodore Executive as does my son in his, it's obviously a Commodore thing.
I cannot see it being the rubber as mine looks perfect and the water is actually coming from inside the lid itself, this leads me to think it must be from the spoiler fixing holes although I have removed one side and all seems as it should, I did find a square hole behind the number plate and was elated thinking I had found the culprit, but alas no such luck, it still comes in by the bucket full and ruins all my power tools...Help.
I have a 1996 Commodore VS series II sedan. Looks like the same song and dance again. I've been searching everywhere for my boot leak which is on the drivers side. I've checked the tailight, the window rubber seals, and the fuel cap whilst running a hose over the sus area... my last brain tinkering thought is that it could be getting in from the under carriage somewhere flickering water up while driving in the rain... the search is on..
Silicone actually causes more rust in the long term. Use SicaFlex instead.
I own a 1996 vs series 2 sedan. Yes I will keep the chain going by saying I too have a sneaky leaky boot aswell. I thought that as well with the rain coming in from the under carriage during wet weather. Who knows once I'm driving along and the back falls away I may find out where the break originated from. Apart from that mine is a bt1 ex police v6 radar patrol car. Very worthy for its age. My old girl has 194,000
on the clock. Paint work is good except for the crows feet down the bottom behind the front wheels.
Note: A Comments RSS Feed 
is available. New comments appear in the Members Area before the main site