Electronic ignition module replaced, 1993.
Third gear became noisy, replaced with a five speed box, 1990.
Front brake discs replaced 3 times due to warping, 1990.
Replaced valve seals, 1995.
Steering rack replaced, 1998.
Originally cost me £3600.
A great car, it just keeps on going and going. I only hope my next car is as good.
There is usually one cause for discs warping: binding brake pads.
Remedy: remove the pads, carefully scrape the alloy oxide off the caliper where the pads slide, and smear these surfaces with a thin coating of copper-based grease. Greasing the pad locating pins is also a good idea. Avoid getting grease on the discs or brake pad friction material.
Note: A Comments RSS Feed is available. New comments appear in the Members Area before the main site