15th Jun 2011, 22:49
You can check for recalls, technical bulletins and investigations at "safercar.gov".
16th Aug 2011, 05:58
You have to adjust a bolt carefully on the throttle body on the intake, next to the air filter. Just give it a few turns, and your van shouldn't stall any more.
13th Jun 2011, 09:06
Do you have a black plastic intake manifold? If so, the isolator bolt grommets are likely hardened and leak un-metered air into the intake, causing lean conditions. It will cost you about $50 for the grommets and the seals, and about 4 hours of turning nuts and bolts.
O.K. you didn't mention a lean code, but it still is a possible cause for your troubles.