29th Apr 2012, 10:22
Hi all!
Just been reading about the water inside the car. I had a 2.2 Signum do the same, and my blower fan stopped working. I found that the drain holes in the bulk head blocked. Pocked these clean with a long screw driver, and the inside soon dried up. The blower fan resister had popped because of the water in the heater box. Replaced the resistor pack, all OK.
8th Feb 2012, 07:20
Just read your comments. Had the same problem. The drain holes under the vent below the windscreen were blocked, and the pollen filter was u/s. Seems to have fixed it, but we've not had heavy rain since.