16th Sep 2011, 13:32
The problem with your sticking gas pedal can be solved with a little carburetor cleaner. Remove the black plastic that connects to the throttle body. Spray the cleaner on all the parts that move, and the shaft on the butterfly valve. The whole job takes about 5 minutes. Do it about every 10,000 miles. Good luck.
31st May 2011, 22:19
There is a set screw that needs to be let out a little and the sticky will go away. As you let off the gas, that screw hits a piece of metal and over time, it turns the screw and leaves slack in the line.